20UPGB43200013

OB_LOADED_MODULE_CELL/LLS_RECEPTION

Component Information

Serial Number 20UPGB43200013
ProdDB ID  79ce5a…24ab30
LocalDB ID 66fbb1b913e0b000433e019c
Component Type BARE_MODULE
Parents 20UPGM23210493 
Children 20UPGFC0132758 FE Chip 20UPGFC0132790 FE Chip 20UPGFC0132807 FE Chip 20UPGFC0132743 FE Chip 20UPGS33303700 Sensor Tile
Flags
Distribution of chips on wafer

 Properties

Item Value
FE chip version readonly 3
Sensor Type 5
Vendor code readonly 2
Thickness of FE chips (RD53A) None

 Comments

 Current Stage:

Past QC Stages and Results

Insertion of pigtail and strain relief glueing (OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION)

Module PCB tab cutting (in Combined Method) (OB_LOADED_MODULE_CELL/TAB_CUTTING)

Reception at Cell Integration Sites (OB_LOADED_MODULE_CELL/RECEPTION)

OB Loaded Module Cell Complete (OB_LOADED_MODULE_CELL/COMPLETE)

OB Loaded Module Cells failed test, needs investigation (OB_LOADED_MODULE_CELL/UNHAPPY)

Grading of OB Loaded Module Cells (OB_LOADED_MODULE_CELL/QC_STATUS)

Envelope Check (OB_LOADED_MODULE_CELL/ENVELOPE_CHECK)

Thermal Conductivity Test at Warm Temperature (OB_LOADED_MODULE_CELL/THERMAL_WARM)

Thermal Conductivity Test at Cold Temperature (OB_LOADED_MODULE_CELL/THERMAL_COLD)

Electrical Tests at Cold Temperature (OB_LOADED_MODULE_CELL/FINAL_COLD)

Electrical Tests at Warm Temperature (OB_LOADED_MODULE_CELL/FINAL_WARM)

Cold Cycle (OB_LOADED_MODULE_CELL/THERMAL_CYCLES)

Module to cell assembly (OB_LOADED_MODULE_CELL/ASSEMBLY)

Initial state to associate bare cell to module (OB_LOADED_MODULE_CELL/INIT)

Electrical testing at reception of LLS (LLS/RECEPTION)

Electrical testing on LLS at cold temperature (LLS/POST_TC_COLD)

Electrical testing on LLS at warm temperature (LLS/POST_TC_WARM)

Electrical testing before thermal cycling on LLS at cold temperature (LLS/PRE_TC_COLD)

Electrical testing before thermal cycling on LLS at warm temperature (LLS/PRE_TC_WARM)

Module PCB tab cutting (MODULE/TAB_CUTTING)

Module reception (MODULE/RECEPTION)

Module Complete (MODULE/COMPLETE)

Modules damaged, impossible to recover (MODULE/GRAVEYARD)

Stage for QA modules and others not to be considered in yield calculation (MODULE/NOTCONSIDEREDINYIELDS)

Modules failed test, needs investigation (MODULE/UNHAPPY)

Ranking of the module (MODULE/QC_STATUS)

Final flatness measurement (MODULE/FINAL_METROLOGY)

Final Cold (MODULE/FINAL_COLD)

Final Warm (MODULE/FINAL_WARM)

Long Term Stability Test (MODULE/LONG_TERM_STABILITY_TEST)

Thermal Cycles (MODULE/THERMAL_CYCLES)

Post-Parylene Cold (MODULE/POST_PARYLENE_COLD)

Post-Parylene Warm (MODULE/POST_PARYLENE_WARM)

Wirebond Protection (alt) (MODULE/WIREBOND_PROTECTION)

Parylene Unmasking (MODULE/PARYLENE_UNMASKING)

Parylene Coating (MODULE/PARYLENE_COATING)

Parylene Masking (MODULE/PARYLENE_MASKING)

Initial Cold (MODULE/INITIAL_COLD)

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Reception at ITk institute (BAREMODULERECEPTION)

Test Local Result ProdDB Record
Sensor IV on bare module
(BARE_MODULE_SENSOR_IV)		 Registered Registered
Flatness
(FLATNESS)		 No result N/A
Mass Measurement
(MASS_MEASUREMENT)		 Registered Registered
Quad Bare Module Metrology
(QUAD_BARE_MODULE_METROLOGY)		 Registered Registered
Single Bare Module Metrology
(SINGLE_BARE_MODULE_METROLOGY)		 No result N/A
Visual Inspection
(VISUAL_INSPECTION)		 Registered Registered

Not to be used for the detector (NOT_USED)

Bare module failed test, needs investigation (UNHAPPY)

Bare module assembly (BAREMODULEASSEMBLY)

LocalDB Test ID Stage Test Name Inspector Measurement Date Analysis Date Tags QC Registration
671114…ae5981 BAREMODULERECEPTION BARE_MODULE_SENSOR_IV PaulMickael Chabrillat N/A a year ago No tags Selected
670f72…a6f382 BAREMODULERECEPTION QUAD_BARE_MODULE_METROLOGY ThomasNaquin N/A a year ago No tags Selected
670f71…2616e5 BAREMODULERECEPTION VISUAL_INSPECTION ThomasNaquin N/A a year ago No tags Selected
Stage Tests
BAREMODULEASSEMBLY
UNHAPPY
NOT_USED
BAREMODULERECEPTION
  • Visual Inspection  (VISUAL_INSPECTION)
  • Mass Measurement  (MASS_MEASUREMENT)
  • Quad Bare Module Metrology  (QUAD_BARE_MODULE_METROLOGY)
  • Flatness  (FLATNESS)
  • Sensor IV on bare module  (BARE_MODULE_SENSOR_IV)
  • Single Bare Module Metrology  (SINGLE_BARE_MODULE_METROLOGY)
MODULE/INIT
MODULE/ASSEMBLY
MODULE/WIREBONDING
MODULE/INITIAL_WARM
MODULE/QC_CROSSCHECK
MODULE/INITIAL_COLD
MODULE/PARYLENE_MASKING
MODULE/PARYLENE_COATING
MODULE/PARYLENE_UNMASKING
MODULE/WIREBOND_PROTECTION
MODULE/POST_PARYLENE_WARM
MODULE/POST_PARYLENE_COLD
MODULE/THERMAL_CYCLES
MODULE/LONG_TERM_STABILITY_TEST
MODULE/FINAL_WARM
MODULE/FINAL_COLD
MODULE/FINAL_METROLOGY
MODULE/QC_STATUS
MODULE/UNHAPPY
MODULE/NOTCONSIDEREDINYIELDS
MODULE/GRAVEYARD
MODULE/COMPLETE
MODULE/RECEPTION
MODULE/TAB_CUTTING
LLS/PRE_TC_WARM
LLS/PRE_TC_COLD
LLS/POST_TC_WARM
LLS/POST_TC_COLD
LLS/RECEPTION
OB_LOADED_MODULE_CELL/INIT
OB_LOADED_MODULE_CELL/ASSEMBLY
OB_LOADED_MODULE_CELL/THERMAL_CYCLES
OB_LOADED_MODULE_CELL/FINAL_WARM
OB_LOADED_MODULE_CELL/FINAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_WARM
OB_LOADED_MODULE_CELL/ENVELOPE_CHECK
OB_LOADED_MODULE_CELL/QC_STATUS
OB_LOADED_MODULE_CELL/UNHAPPY
OB_LOADED_MODULE_CELL/COMPLETE
OB_LOADED_MODULE_CELL/RECEPTION
OB_LOADED_MODULE_CELL/TAB_CUTTING
OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION
Back to top page of this component