20UPGPQ2210493

OB_LOADED_MODULE_CELL/LLS_RECEPTION

Component Information

Serial Number 20UPGPQ2210493
ProdDB ID  367ae0…77f5b3
LocalDB ID 65f0e4adbb920b0035f65fca
Component Type MODULE_PCB
Parents 20UPGM23210493 
Children No match.
Flags

 Properties

Item Value
PCB Manufacturer NCAB
PCB design version readonly 2
PCB vendor technology readonly 2
SMD population vendor Garner Osborne Circuits
PCB BOM version 12

 Comments


Test: METROLOGY QC Passed

(Stage: PCB_RECEPTION_MODULE_SITE)


Basic View Only: custom view for this TestRun is not prepared.

Metadata

Key Data
QC Passed True
Date a year ago
component ObjectId 65f0e4adbb920b0035f65fca
Stage PCB_RECEPTION_MODULE_SITE
Test Type METROLOGY
Institute ObjectId
User Name PaulMickael Chabrillat
ObjectId of this record 66fc2cafef991c0043c35e82
ObjectId of RAW record None
Tags No tags

Results

Key Data
ANALYSIS_VERSION mqat vNone
INSTRUMENT None
OPERATOR None
AVERAGE_THICKNESS_FECHIP_PICKUP_AREAS 0.237
AVERAGE_THICKNESS_POWER_CONNECTOR 1.556
DIAMETER_DOWEL_HOLE_A N/A
HV_CAPACITOR_THICKNESS 1.878
HV_CAPACITOR_THICKNESS_WITHIN_ENVELOP True
STD_DEVIATION_THICKNESS_FECHIP_PICKUP_AREAS 0.002
WIDTH_DOWEL_SLOT_B N/A
X-Y_DIMENSION_WITHIN_ENVELOP True
X_DIMENSION 39.596
Y_DIMENSION 40.573

ProductionDB Record

id66fc2cafef991c0043c35e82
stateready
stateTs2024-10-01T17:09:03.407Z
stateUserIdentity9291-3358-1
date2024-10-01T17:07:00.000Z
testType
id60255faf86dec3000ad0330d
codeMETROLOGY
nameMetrology
stateactive
institution
id5d42fb891fd678000a409866
codeLPNHE
nameLaboratoire de Physique Nucléaire et de Hautes Energies
user
id62fb7d122d8fbc000ac46493
userIdentity9291-3358-1
firstNamePaul
middleName
lastNameMickael Chabrillat
runNumber1
passedTrue
problemsFalse
properties
codenamedataTypevalueTyperequiredvaluerangeMinrangeMax
ANALYSIS_VERSIONAnalysis VersionstringsingleFalseNoneNoneNone
INSTRUMENTInstrumentstringsingleFalseNoneNoneNone
OPERATOROperatorstringsingleFalseNoneNoneNone
results
codenamedataTypevalueTypearrayDimensionsadditionalvalueassociateChild
AVERAGE_THICKNESS_FECHIP_PICKUP_AREASAverage thickness of all pick-up areas [mm]floatsingle1False0.237None
AVERAGE_THICKNESS_POWER_CONNECTORThickness including the black body of power connector (excluding pins) [mm]floatsingleNoneFalse1.556None
DIAMETER_DOWEL_HOLE_ADiameter of dowel hole A (top left) (for PCB reception from vendor only) [mm]floatsingleNoneFalseNoneNone
HV_CAPACITOR_THICKNESSHV capacitor thickness [mm]floatsingleNoneFalse1.878None
HV_CAPACITOR_THICKNESS_WITHIN_ENVELOPHV capacitor thickness within envelopbooleansingleNoneFalseTrueNone
STD_DEVIATION_THICKNESS_FECHIP_PICKUP_AREASStd deviation of thickness of all pick-up area [mm]floatsingle1False0.002None
WIDTH_DOWEL_SLOT_BWidth of dowel slot B (bottom right) (for PCB reception from vendor only) [mm]floatsingleNoneFalseNoneNone
X-Y_DIMENSION_WITHIN_ENVELOPX-Y dimension within envelopebooleansingleNoneFalseTrueNone
X_DIMENSIONX dimension [mm]floatsingleNoneFalse39.596None
Y_DIMENSIONY dimension [mm]floatsingleNoneFalse40.573None
cts2024-10-01T17:09:03.407Z
sys
cts2024-10-01T17:09:03.407Z
mts2024-10-01T17:09:03.407Z
rev0
defects
commentsNone
attachments
components
idcodestatestateTsstateUserIdentitydummycompletedcompletedTscompletedUserIdentitytrashedtrashedTstrashedUserIdentityserialNumberalternativeIdentifierprojectsubprojectcomponentTypetypepropertiestestedAtStageinstitution
65f0e4adbb920b0035f65fca367ae031a4271c8ccb6a74a36377f5b3ready2024-03-12T23:26:37.408Z2355-570-1FalseFalseNoneNoneFalseNoneNone20UPGPQ2210493None
codeP
namePixels
codePG
namePixel general
codePCB
nameModule PCB
codeQUAD_PCB
nameQuad PCB
  • codePCB_MANUFACTURER
    namePCB Manufacturer
    dataTypestring
    requiredTrue
    defaultFalse
    valueNCAB
  • codePCB_DESIGN_VERSION
    namePCB design version
    dataTypecodeTable
    requiredTrue
    defaultFalse
    valuePreproduction OS
    codeTable
    codevalue
    0RD53A
    1Prototype
    2Preproduction OS
    3Preproduction IS
    4Production OS
    5Production IS
    9No chip
  • codePCB_VENDOR_TECHNOLOGY
    namePCB vendor technology
    dataTypecodeTable
    requiredTrue
    defaultFalse
    valueNCAB (100 mum trace)
    codeTable
    codevalue
    1EPEC (100 mum trace)
    2NCAB (100 mum trace)
    3ALTAFLEX (75 mum trace)
    4SFCircuits (100 mum trace)
    5PHOENIX (100 mum trae)
    6Yamashita Material (75 mum trace)
    7NCAB (75 mum trace)
    8Tecnomec (100 mum trace)
  • codeSMD_POPULATION_VENDOR
    nameSMD population vendor
    dataTypestring
    requiredFalse
    defaultFalse
    valueGarner Osborne Circuits
  • codePCB_BOM_VERSION
    namePCB BOM version
    dataTypecodeTable
    requiredFalse
    defaultFalse
    valueV1.1 L2
    codeTable
    codevalue
    10V1.1 L0
    11V1.1 L1
    12V1.1 L2
    20V2 L0
    21V2 L1
    22V2 L2
codePCB_RECEPTION_MODULE_SITE
namePCB Reception at module site
order12
initialFalse
finalFalse
codeEDI
nameUniversity of Edinburgh

 Current Stage:

Past QC Stages and Results

Insertion of pigtail and strain relief glueing (OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION)

Module PCB tab cutting (in Combined Method) (OB_LOADED_MODULE_CELL/TAB_CUTTING)

Reception at Cell Integration Sites (OB_LOADED_MODULE_CELL/RECEPTION)

OB Loaded Module Cell Complete (OB_LOADED_MODULE_CELL/COMPLETE)

OB Loaded Module Cells failed test, needs investigation (OB_LOADED_MODULE_CELL/UNHAPPY)

Grading of OB Loaded Module Cells (OB_LOADED_MODULE_CELL/QC_STATUS)

Envelope Check (OB_LOADED_MODULE_CELL/ENVELOPE_CHECK)

Thermal Conductivity Test at Warm Temperature (OB_LOADED_MODULE_CELL/THERMAL_WARM)

Thermal Conductivity Test at Cold Temperature (OB_LOADED_MODULE_CELL/THERMAL_COLD)

Electrical Tests at Cold Temperature (OB_LOADED_MODULE_CELL/FINAL_COLD)

Electrical Tests at Warm Temperature (OB_LOADED_MODULE_CELL/FINAL_WARM)

Cold Cycle (OB_LOADED_MODULE_CELL/THERMAL_CYCLES)

Module to cell assembly (OB_LOADED_MODULE_CELL/ASSEMBLY)

Initial state to associate bare cell to module (OB_LOADED_MODULE_CELL/INIT)

Electrical testing at reception of LLS (LLS/RECEPTION)

Electrical testing on LLS at cold temperature (LLS/POST_TC_COLD)

Electrical testing on LLS at warm temperature (LLS/POST_TC_WARM)

Electrical testing before thermal cycling on LLS at cold temperature (LLS/PRE_TC_COLD)

Electrical testing before thermal cycling on LLS at warm temperature (LLS/PRE_TC_WARM)

Module PCB tab cutting (MODULE/TAB_CUTTING)

Module reception (MODULE/RECEPTION)

Module Complete (MODULE/COMPLETE)

Modules damaged, impossible to recover (MODULE/GRAVEYARD)

Stage for QA modules and others not to be considered in yield calculation (MODULE/NOTCONSIDEREDINYIELDS)

Modules failed test, needs investigation (MODULE/UNHAPPY)

Ranking of the module (MODULE/QC_STATUS)

Final flatness measurement (MODULE/FINAL_METROLOGY)

Final Cold (MODULE/FINAL_COLD)

Final Warm (MODULE/FINAL_WARM)

Long Term Stability Test (MODULE/LONG_TERM_STABILITY_TEST)

Thermal Cycles (MODULE/THERMAL_CYCLES)

Post-Parylene Cold (MODULE/POST_PARYLENE_COLD)

Post-Parylene Warm (MODULE/POST_PARYLENE_WARM)

Wirebond Protection (alt) (MODULE/WIREBOND_PROTECTION)

Parylene Unmasking (MODULE/PARYLENE_UNMASKING)

Parylene Coating (MODULE/PARYLENE_COATING)

Parylene Masking (MODULE/PARYLENE_MASKING)

Initial Cold (MODULE/INITIAL_COLD)

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Complete (COMPLETE)

PCB Reception at module site (PCB_RECEPTION_MODULE_SITE)

Test Local Result ProdDB Record
Mass
(MASS)		 Registered Registered
Metrology
(METROLOGY)		 Registered Registered
Metrology Triplet Linear
(TRIPLET_PCB_LINEAR_METROLOGY)		 No result N/A
Metrology Triplet Ring
(TRIPLET_PCB_RING_METROLOGY)		 No result N/A
Visual Inspection
(VISUAL_INSPECTION)		 Registered Registered

PCB ready for module (PCB_READY_FOR_MODULE)

PCB impossible to recover (PCB/GRAVEYARD)

Test failed, needs investigation (UNHAPPY)

QC (PCB_QC)

Test Local Result ProdDB Record
Dowel Tolerance Check
(DOWEL_TOLERANCE_CHECK)		 No result N/A
LV and HV Test
(HV_LV_TEST)		 Registered Registered
Tab cutting and gross defect inspection
(QUICK_TAB_CUTTING_INSPECTION)		 No result N/A

QA post radiation cycle (QA_POST_RADIATION_CYCLE)

Test Local Result ProdDB Record
Signal Transmission
(SIGNAL_TRANSMISSION)		 No result N/A
Via resistance
(VIA_RESISTANCE)		 No result N/A

QA post radiation post thermal cycle QC (QA_POST_RADIATION_POST_THERMAL_CYCLE)

Test Local Result ProdDB Record
Signal Transmission
(SIGNAL_TRANSMISSION)		 No result N/A
Via resistance
(VIA_RESISTANCE)		 No result N/A

QA pre-radiation cycle (QA_PRE_RADIATION_CYCLE)

Test Local Result ProdDB Record
LV and HV Test
(HV_LV_TEST)		 No result N/A
Metrology
(METROLOGY)		 No result N/A
NTC Verification
(NTC_VERIFICATION)		 No result N/A
Signal Transmission
(SIGNAL_TRANSMISSION)		 No result N/A
SLDO and precision resistors
(SLDO_RESISTORS)		 No result N/A
Via resistance
(VIA_RESISTANCE)		 No result N/A
Wirebond pull test
(WIREBOND_PULL_TEST)		 No result N/A

QA post-thermal cycle / thermal shock (QA_POST_THERMAL_CYCLE)

Test Local Result ProdDB Record
LV and HV Test
(HV_LV_TEST)		 No result N/A
NTC Verification
(NTC_VERIFICATION)		 No result N/A
Via resistance
(VIA_RESISTANCE)		 No result N/A
Wirebond pull test
(WIREBOND_PULL_TEST)		 No result N/A

QA pre-thermal cycle / thermal shock (QA_PRE_THERMAL_CYCLE)

Test Local Result ProdDB Record
LV and HV Test
(HV_LV_TEST)		 No result N/A
Metrology
(METROLOGY)		 No result N/A
NTC Verification
(NTC_VERIFICATION)		 No result N/A
Signal Transmission
(SIGNAL_TRANSMISSION)		 No result N/A
SLDO and precision resistors
(SLDO_RESISTORS)		 No result N/A
Via resistance
(VIA_RESISTANCE)		 No result N/A
Wirebond pull test
(WIREBOND_PULL_TEST)		 No result N/A

Population (PCB_POPULATION)

Test Local Result ProdDB Record
Component Position Check
(COMPONENT_POSITION_CHECK)		 No result N/A
Visual Inspection
(VISUAL_INSPECTION)		 No result N/A

PCB being populated (PCB_BEING_POPULATED)

Reception (PCB_RECEPTION)

Test Local Result ProdDB Record
Dowel Tolerance Check
(DOWEL_TOLERANCE_CHECK)		 No result N/A
Image capture test
(IMAGE_CAPTURE_TEST)		 No result N/A
Layer thickness measurement
(LAYER_THICKNESS)		 No result N/A
Metrology
(METROLOGY)		 No result N/A
Metrology Triplet Linear
(TRIPLET_PCB_LINEAR_METROLOGY)		 No result N/A
Metrology Triplet Ring
(TRIPLET_PCB_RING_METROLOGY)		 No result N/A
Via resistance
(VIA_RESISTANCE)		 No result N/A
Visual Inspection
(VISUAL_INSPECTION)		 No result N/A

Bare PCB Initial (PCB_INIT)

LocalDB Test ID Stage Test Name Inspector Measurement Date Analysis Date Tags QC Registration
67111a…ae7418 PCB_RECEPTION_MODULE_SITE VISUAL_INSPECTION PaulMickael Chabrillat N/A a year ago No tags Selected
66fc2c…c35e82 PCB_RECEPTION_MODULE_SITE METROLOGY PaulMickael Chabrillat N/A a year ago No tags Selected
66fc2c…c49d65 PCB_RECEPTION_MODULE_SITE MASS PaulMickael Chabrillat N/A a year ago No tags Selected
66e12d…a3817d PCB_QC HV_LV_TEST FuatUstuner N/A a year ago No tags Selected
Stage Tests
PCB_INIT
PCB_RECEPTION
  • Visual Inspection  (VISUAL_INSPECTION)
  • Metrology  (METROLOGY)
  • Dowel Tolerance Check  (DOWEL_TOLERANCE_CHECK)
  • Layer thickness measurement  (LAYER_THICKNESS)
  • Image capture test  (IMAGE_CAPTURE_TEST)
  • Via resistance  (VIA_RESISTANCE)
  • Metrology Triplet Linear  (TRIPLET_PCB_LINEAR_METROLOGY)
  • Metrology Triplet Ring  (TRIPLET_PCB_RING_METROLOGY)
PCB_BEING_POPULATED
PCB_POPULATION
  • Visual Inspection  (VISUAL_INSPECTION)
  • Component Position Check  (COMPONENT_POSITION_CHECK)
QA_PRE_THERMAL_CYCLE
  • SLDO and precision resistors   (SLDO_RESISTORS)
  • NTC Verification  (NTC_VERIFICATION)
  • Signal Transmission  (SIGNAL_TRANSMISSION)
  • Via resistance  (VIA_RESISTANCE)
  • Metrology  (METROLOGY)
  • LV and HV Test  (HV_LV_TEST)
  • Wirebond pull test  (WIREBOND_PULL_TEST)
QA_POST_THERMAL_CYCLE
  • NTC Verification  (NTC_VERIFICATION)
  • Via resistance  (VIA_RESISTANCE)
  • LV and HV Test  (HV_LV_TEST)
  • Wirebond pull test  (WIREBOND_PULL_TEST)
QA_PRE_RADIATION_CYCLE
  • Signal Transmission  (SIGNAL_TRANSMISSION)
  • Via resistance  (VIA_RESISTANCE)
  • Metrology  (METROLOGY)
  • SLDO and precision resistors   (SLDO_RESISTORS)
  • NTC Verification  (NTC_VERIFICATION)
  • Wirebond pull test  (WIREBOND_PULL_TEST)
  • LV and HV Test  (HV_LV_TEST)
QA_POST_RADIATION_POST_THERMAL_CYCLE
  • Signal Transmission  (SIGNAL_TRANSMISSION)
  • Via resistance  (VIA_RESISTANCE)
QA_POST_RADIATION_CYCLE
  • Signal Transmission  (SIGNAL_TRANSMISSION)
  • Via resistance  (VIA_RESISTANCE)
PCB_QC
  • LV and HV Test  (HV_LV_TEST)
  • Dowel Tolerance Check  (DOWEL_TOLERANCE_CHECK)
  • Tab cutting and gross defect inspection  (QUICK_TAB_CUTTING_INSPECTION)
UNHAPPY
PCB/GRAVEYARD
PCB_READY_FOR_MODULE
PCB_RECEPTION_MODULE_SITE
  • Visual Inspection  (VISUAL_INSPECTION)
  • Mass  (MASS)
  • Metrology  (METROLOGY)
  • Metrology Triplet Linear  (TRIPLET_PCB_LINEAR_METROLOGY)
  • Metrology Triplet Ring  (TRIPLET_PCB_RING_METROLOGY)
COMPLETE
MODULE/INIT
MODULE/ASSEMBLY
MODULE/WIREBONDING
MODULE/INITIAL_WARM
MODULE/QC_CROSSCHECK
MODULE/INITIAL_COLD
MODULE/PARYLENE_MASKING
MODULE/PARYLENE_COATING
MODULE/PARYLENE_UNMASKING
MODULE/WIREBOND_PROTECTION
MODULE/POST_PARYLENE_WARM
MODULE/POST_PARYLENE_COLD
MODULE/THERMAL_CYCLES
MODULE/LONG_TERM_STABILITY_TEST
MODULE/FINAL_WARM
MODULE/FINAL_COLD
MODULE/FINAL_METROLOGY
MODULE/QC_STATUS
MODULE/UNHAPPY
MODULE/NOTCONSIDEREDINYIELDS
MODULE/GRAVEYARD
MODULE/COMPLETE
MODULE/RECEPTION
MODULE/TAB_CUTTING
LLS/PRE_TC_WARM
LLS/PRE_TC_COLD
LLS/POST_TC_WARM
LLS/POST_TC_COLD
LLS/RECEPTION
OB_LOADED_MODULE_CELL/INIT
OB_LOADED_MODULE_CELL/ASSEMBLY
OB_LOADED_MODULE_CELL/THERMAL_CYCLES
OB_LOADED_MODULE_CELL/FINAL_WARM
OB_LOADED_MODULE_CELL/FINAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_WARM
OB_LOADED_MODULE_CELL/ENVELOPE_CHECK
OB_LOADED_MODULE_CELL/QC_STATUS
OB_LOADED_MODULE_CELL/UNHAPPY
OB_LOADED_MODULE_CELL/COMPLETE
OB_LOADED_MODULE_CELL/RECEPTION
OB_LOADED_MODULE_CELL/TAB_CUTTING
OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION
Back to top page of this component