Top Page > Component List > 20UPGBS3936026 > QC Result

20UPGBS3936026
Single-Digital-BareModule/ITkPix_v2
  ITkPD Component Page Jump to ITkPD component page

Component Information

Item Value
Serial Number 20UPGBS3936026
Production DB Component ID ecceea6e85661956c381ffb6569e75d5
LocalDB Component ID 66753b07ead3ed0035eab35d
Component Type bare_module
Super-Component 20UPIR63102150 
Sub-Components •  20UPGFC0136026   FE Chip
Flags

Properties

Item Data Type Value
FE chip version codeTable 3
Sensor Type codeTable 0
Vendor code codeTable 9
Thickness of FE chips (RD53A) codeTable None

Comments

Current Stage: Initial Cold

No tests are allocated for this stage.

Past QC Stages and Results

  Stage: QC cross-check (module swapping) (MODULE/QC_CROSSCHECK) Alternative

No tests are allocated for this stage.

  Stage: Initial Warm (MODULE/INITIAL_WARM) Complete

No tests are allocated for this stage.

  Stage: Wire Bonding (MODULE/WIREBONDING) Complete

No tests are allocated for this stage.

  Stage: Bare module to module PCB assembly (MODULE/ASSEMBLY) Complete

No tests are allocated for this stage.

  Stage: Initial state to associate flex to bare module (MODULE/INIT) Complete

No tests are allocated for this stage.

  Stage: Reception at ITk institute (BAREMODULERECEPTION) Locally Signed Off

Test Local Result ProdDB Record
Sensor IV on bare module
(BARE_MODULE_SENSOR_IV)
No result Test is missing in LocalDB.
N/A Test is not pushed to ITkPD.
Flatness
(FLATNESS)
No result Test is missing in LocalDB.
N/A Test is not pushed to ITkPD.
Mass Measurement
(MASS_MEASUREMENT)
No result Test is missing in LocalDB.
N/A Test is not pushed to ITkPD.
Quad Bare Module Metrology
(QUAD_BARE_MODULE_METROLOGY)
No result Test is missing in LocalDB.
N/A Test is not pushed to ITkPD.
Single Bare Module Metrology
(SINGLE_BARE_MODULE_METROLOGY)
No result Test is missing in LocalDB.
N/A Test is not pushed to ITkPD.
Visual Inspection
(VISUAL_INSPECTION)
No result Test is missing in LocalDB.
N/A Test is not pushed to ITkPD.

  Stage: Not to be used for the detector (NOT_USED) Alternative

No tests are allocated for this stage.

  Stage: Bare module failed test, needs investigation (UNHAPPY) Alternative

No tests are allocated for this stage.

  Stage: Bare module assembly (BAREMODULEASSEMBLY) Complete

No tests are allocated for this stage.

Stage Tests
BAREMODULEASSEMBLY
UNHAPPY
NOT_USED
BAREMODULERECEPTION
  • Visual Inspection  (VISUAL_INSPECTION)
  • Mass Measurement  (MASS_MEASUREMENT)
  • Quad Bare Module Metrology  (QUAD_BARE_MODULE_METROLOGY)
  • Flatness  (FLATNESS)
  • Sensor IV on bare module  (BARE_MODULE_SENSOR_IV)
  • Single Bare Module Metrology  (SINGLE_BARE_MODULE_METROLOGY)
MODULE/INIT
MODULE/ASSEMBLY
MODULE/WIREBONDING
MODULE/INITIAL_WARM
MODULE/QC_CROSSCHECK
MODULE/INITIAL_COLD
MODULE/PARYLENE_MASKING
MODULE/PARYLENE_COATING
MODULE/PARYLENE_UNMASKING
MODULE/POST_PARYLENE_WARM
MODULE/POST_PARYLENE_COLD
MODULE/WIREBOND_PROTECTION
MODULE/THERMAL_CYCLES
MODULE/LONG_TERM_STABILITY_TEST
MODULE/FINAL_WARM
MODULE/FINAL_COLD
MODULE/FINAL_METROLOGY
MODULE/QC_STATUS
MODULE/UNHAPPY
MODULE/NOTCONSIDEREDINYIELDS
MODULE/COMPLETE
MODULE/RECEPTION
MODULE/TAB_CUTTING
OB_LOADED_MODULE_CELL/INIT
OB_LOADED_MODULE_CELL/ASSEMBLY
OB_LOADED_MODULE_CELL/THERMAL_CYCLES
OB_LOADED_MODULE_CELL/FINAL_WARM
OB_LOADED_MODULE_CELL/FINAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_WARM
OB_LOADED_MODULE_CELL/ENVELOPE_CHECK
OB_LOADED_MODULE_CELL/QC_STATUS
OB_LOADED_MODULE_CELL/UNHAPPY
OB_LOADED_MODULE_CELL/COMPLETE
OB_LOADED_MODULE_CELL/RECEPTION
OB_LOADED_MODULE_CELL/TAB_CUTTING
OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION
Back to top page of this component