20UPGB42200012

MODULE/INITIAL_COLD

Component Information

Serial Number 20UPGB42200012
ProdDB ID  e2b6a8…9b6d6f
LocalDB ID 64b7f7c20ca4ae0042e7024f
Component Type BARE_MODULE
Parents 20UPGM22110303 
Children 20UPGFC0096418 FE Chip 20UPGFC0096307 FE Chip 20UPGFC0096339 FE Chip 20UPGFC0096323 FE Chip 20UPGS33300196 Sensor Tile
Flags
Distribution of chips on wafer

 Properties

Item Value
FE chip version readonly 2
Sensor Type 5
Vendor code readonly 2
Thickness of FE chips (RD53A) None

 Comments

 Current Stage: Initial Cold

Past QC Stages and Results

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Reception at ITk institute (BAREMODULERECEPTION)

Test Local Result ProdDB Record
Sensor IV on bare module
(BARE_MODULE_SENSOR_IV)		 Registered Registered
Flatness
(FLATNESS)		 No result N/A
Mass Measurement
(MASS_MEASUREMENT)		 Registered Registered
Quad Bare Module Metrology
(QUAD_BARE_MODULE_METROLOGY)		 Registered Registered
Single Bare Module Metrology
(SINGLE_BARE_MODULE_METROLOGY)		 No result N/A
Visual Inspection
(VISUAL_INSPECTION)		 No result N/A

Not to be used for the detector (NOT_USED)

Bare module failed test, needs investigation (UNHAPPY)

Bare module assembly (BAREMODULEASSEMBLY)

LocalDB Test ID Stage Test Name Inspector Measurement Date Analysis Date Tags QC Registration
65436a…0162e8 BAREMODULERECEPTION MASS_MEASUREMENT FrancescoCrescioli N/A 2 years ago No tags Selected
65413d…8410e4 BAREMODULERECEPTION QUAD_BARE_MODULE_METROLOGY FrancescoCrescioli N/A 2 years ago No tags Selected
652813…366c99 BAREMODULERECEPTION BARE_MODULE_SENSOR_IV FrancescoCrescioli N/A 2 years ago No tags Selected
Stage Tests
BAREMODULEASSEMBLY
UNHAPPY
NOT_USED
BAREMODULERECEPTION
  • Visual Inspection  (VISUAL_INSPECTION)
  • Mass Measurement  (MASS_MEASUREMENT)
  • Quad Bare Module Metrology  (QUAD_BARE_MODULE_METROLOGY)
  • Flatness  (FLATNESS)
  • Sensor IV on bare module  (BARE_MODULE_SENSOR_IV)
  • Single Bare Module Metrology  (SINGLE_BARE_MODULE_METROLOGY)
MODULE/INIT
MODULE/ASSEMBLY
MODULE/WIREBONDING
MODULE/INITIAL_WARM
MODULE/QC_CROSSCHECK
MODULE/INITIAL_COLD
MODULE/PARYLENE_MASKING
MODULE/PARYLENE_COATING
MODULE/PARYLENE_UNMASKING
MODULE/WIREBOND_PROTECTION
MODULE/POST_PARYLENE_WARM
MODULE/POST_PARYLENE_COLD
MODULE/THERMAL_CYCLES
MODULE/LONG_TERM_STABILITY_TEST
MODULE/FINAL_WARM
MODULE/FINAL_COLD
MODULE/FINAL_METROLOGY
MODULE/QC_STATUS
MODULE/UNHAPPY
MODULE/NOTCONSIDEREDINYIELDS
MODULE/GRAVEYARD
MODULE/COMPLETE
MODULE/RECEPTION
MODULE/TAB_CUTTING
LLS/PRE_TC_WARM
LLS/PRE_TC_COLD
LLS/POST_TC_WARM
LLS/POST_TC_COLD
LLS/RECEPTION
OB_LOADED_MODULE_CELL/INIT
OB_LOADED_MODULE_CELL/ASSEMBLY
OB_LOADED_MODULE_CELL/THERMAL_CYCLES
OB_LOADED_MODULE_CELL/FINAL_WARM
OB_LOADED_MODULE_CELL/FINAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_WARM
OB_LOADED_MODULE_CELL/ENVELOPE_CHECK
OB_LOADED_MODULE_CELL/QC_STATUS
OB_LOADED_MODULE_CELL/UNHAPPY
OB_LOADED_MODULE_CELL/COMPLETE
OB_LOADED_MODULE_CELL/RECEPTION
OB_LOADED_MODULE_CELL/TAB_CUTTING
OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION
Back to top page of this component