20UPGB43200370

MODULE/UNHAPPY

Component Information

Serial Number	20UPGB43200370
ProdDB ID	b155a4…c50427
LocalDB ID	6810f23e54aadc8e96c6f258
Component Type	BARE_MODULE
Parents	20UPGM24211489
Children	20UPGFC0146887 FE Chip 20UPGFC0146793 FE Chip 20UPGFC0146828 FE Chip 20UPGFC0146731 FE Chip 20UPGS33304750 Sensor Tile
Flags

Broken at FE chip level

Broken during handling

Broken at sensor level

FE chip or chips fell off

Other issues

Inner pixel

Used for bare module QA

Distribution of chips on wafer

Properties

Item	Value
FE chip version readonly	3
Sensor Type	5
Vendor code readonly	2
Thickness of FE chips (RD53A)	None

Comments

Test: QUAD_BARE_MODULE_METROLOGY QC Passed

(Stage: BAREMODULERECEPTION)

Basic View Only: custom view for this TestRun is not prepared.

Metadata

Key	Data
QC Passed	True
Date	10 months ago
component ObjectId	6810f23e54aadc8e96c6f258
Stage	BAREMODULERECEPTION
Test Type	QUAD_BARE_MODULE_METROLOGY
Institute ObjectId
User Name	Simpson,Liana Rae
ObjectId of this record	68b095bfac202b0e6ffbdcc4
ObjectId of RAW record	None
Tags	No tags

Results

Key	Data
SENSOR_X	39.51519
SENSOR_Y	41.1097
FECHIPS_X	42.23908
FECHIPS_Y	40.28163
FECHIP_THICKNESS	173
FECHIP_THICKNESS_STD_DEVIATION	4
BARE_MODULE_THICKNESS	344.6
BARE_MODULE_THICKNESS_STD_DEVIATION	3.4

ProductionDB Record

Expand ProductionDB Record

68b095bfac202b0e6ffbdcc4

state

ready

stateTs

2025-08-28T17:45:35.264Z

stateUserIdentity

1294-8027-1

date

2025-07-14T13:46:55.000Z

testType

id	5f87e63950d75e000a335aac
code	QUAD_BARE_MODULE_METROLOGY
name	Quad Bare Module Metrology
state	active

institution

id	5d318624df98f200097386d5
code	ANL
name	Argonne National Laboratory

user

id	6797ca0f2ffbf908f24868f9
userIdentity	1294-8027-1
firstName	Simpson,
middleName
lastName	Liana Rae

runNumber

passed

True

problems

False

properties

results

code	name	dataType	valueType	arrayDimensions	additional	value	associateChild
SENSOR_X	Sensor dimension in x [mm]	float	single	None	False	39.51519	None
SENSOR_Y	Sensor dimension in y [mm]	float	single	None	False	41.1097	None
FECHIPS_X	FE chips x dimension [mm]	float	single	1	False	42.23908	None
FECHIPS_Y	FE chips y dimension [mm]	float	single	1	False	40.28163	None
FECHIP_THICKNESS	Average FE chip thickness [µm]	float	single	None	False	173	None
FECHIP_THICKNESS_STD_DEVIATION	Std deviation of FE chip thickness [µm]	float	single	None	False	4	None
BARE_MODULE_THICKNESS	Average bare module thickness [µm]	float	single	None	False	344.6	None
BARE_MODULE_THICKNESS_STD_DEVIATION	Std deviation of bare module thickness [µm]	float	single	None	False	3.4	None

cts

2025-08-28T17:45:35.264Z

sys

cts	2025-08-28T17:45:35.264Z
mts	2025-08-28T17:45:35.264Z
rev	0

defects

comments

None

attachments

components

code

state

stateTs

stateUserIdentity

dummy

completed

completedTs

completedUserIdentity

trashed

trashedTs

trashedUserIdentity

serialNumber

alternativeIdentifier

ancestorMap

project

subproject

componentType

type

properties

testedAtStage

institution

6810f23e54aadc8e96c6f258

b155a42b5559add6484e25c0e5c50427

ready

2025-04-29T15:37:34.832Z

23-6780-1

False

None

False

None

20UPGB43200370

None

parent

component

689ce84fe945399df1ed9a5c

code

d7b7c88eb40c720c6de56cd78c23d838

state

ready

stateTs

2025-08-13T19:32:30.871Z

stateUserIdentity

1294-8027-1

dummy

False

completed

False

completedTs

None

completedUserIdentity

None

trashed

False

trashedTs

None

trashedUserIdentity

None

serialNumber

20UPGM24211489

alternativeIdentifier

ANL_ITkPix_132

project

code	P
name	Pixels

subproject

code	PG
name	Pixel general

componentType

code	MODULE
name	Module

type

code	OUTER_SYSTEM_QUAD_MODULE
name	Outer system quad module

testedAtStage

code	MODULE/INIT
name	Initial state to associate flex to bare module

highestLevelParent

component

689ce84fe945399df1ed9a5c

code

d7b7c88eb40c720c6de56cd78c23d838

state

ready

stateTs

2025-08-13T19:32:30.871Z

stateUserIdentity

1294-8027-1

dummy

False

completed

False

completedTs

None

completedUserIdentity

None

trashed

False

trashedTs

None

trashedUserIdentity

None

serialNumber

20UPGM24211489

alternativeIdentifier

ANL_ITkPix_132

project

code	P
name	Pixels

subproject

code	PG
name	Pixel general

componentType

code	MODULE
name	Module

type

code	OUTER_SYSTEM_QUAD_MODULE
name	Outer system quad module

testedAtStage

code	MODULE/INIT
name	Initial state to associate flex to bare module

code	P
name	Pixels

code	PG
name	Pixel general

code	BARE_MODULE
name	Bare Module

code	QUAD_BARE_MODULE
name	Quad bare module

code

name

dataType

required

default

value

codeTable

FECHIP_VERSION

FE chip version

codeTable

True

False

ITkpix_v2

code	value
0	RD53A
1	ITkpix_v1
2	ITkpix_v1.1
3	ITkpix_v2
9	No FE chip

SENSOR_TYPE

Sensor Type

codeTable

True

False

Outer pixel quad sensor tile

code	value
0	No sensor
1	Market survey sensor tile
2	L0 inner pixel 3D sensor tile
3	L0 inner pixel planar sensor tile
4	L1 inner pixel quad sensor tile
5	Outer pixel quad sensor tile
9	Dummy sensor tile

VENDOR

Vendor code

codeTable

True

False

IZM

code	value
0	Advacam
1	Leonardo
2	IZM
3	HPK (in-kind)
4	HPK (CERN order)
5	RAL (in-house)
6	Glasgow (in-house)
9	ITk institute

code	BAREMODULERECEPTION
name	Reception at ITk institute
order	4
initial	False
final	False

code	IZM
name	Fraunhofer-Institut für Zuverlässigkeit und Mikrointegration (IZM)

Current Stage: Modules failed test, needs investigation

No tests are allocated for this stage.

Past QC Stages and Results

Ranking of the module (MODULE/QC_STATUS)

Final flatness measurement (MODULE/FINAL_METROLOGY)

Final Cold (MODULE/FINAL_COLD)

Final Warm (MODULE/FINAL_WARM)

Long Term Stability Test (MODULE/LONG_TERM_STABILITY_TEST)

Thermal Cycles (MODULE/THERMAL_CYCLES)

Post-Parylene Cold (MODULE/POST_PARYLENE_COLD)

Post-Parylene Warm (MODULE/POST_PARYLENE_WARM)

Wirebond Protection (alt) (MODULE/WIREBOND_PROTECTION)

Parylene Unmasking (MODULE/PARYLENE_UNMASKING)

Parylene Coating (MODULE/PARYLENE_COATING)

Parylene Masking (MODULE/PARYLENE_MASKING)

Initial Cold (MODULE/INITIAL_COLD)

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Reception at ITk institute (BAREMODULERECEPTION)

Test	Local Result	ProdDB Record
Sensor IV on bare module (BARE_MODULE_SENSOR_IV)	Registered	Registered
Flatness (FLATNESS)	No result	N/A
Mass Measurement (MASS_MEASUREMENT)	Registered	Registered
Quad Bare Module Metrology (QUAD_BARE_MODULE_METROLOGY)	Registered	Registered
Single Bare Module Metrology (SINGLE_BARE_MODULE_METROLOGY)	No result	N/A
Visual Inspection (VISUAL_INSPECTION)	Registered	Registered

GRAVEYARD - (unassembled) Bare Module impossible to recover (BAREMODULE/GRAVEYARD)

Not to be used for the detector (NOT_USED)

Bare module failed test, needs investigation (UNHAPPY)

Bare module assembly (BAREMODULEASSEMBLY)

LocalDB Test ID	Stage	Test Name	Inspector	Measurement Date	Analysis Date	Tags	QC Registration
68b098…4f036d	BAREMODULERECEPTION	BARE_MODULE_SENSOR_IV	Simpson,Liana Rae	N/A	10 months ago	No tags	Selected
68b095…fbdcc4	BAREMODULERECEPTION	QUAD_BARE_MODULE_METROLOGY	Simpson,Liana Rae	N/A	10 months ago	No tags	Selected
68afdc…f57e67	BAREMODULERECEPTION	MASS_MEASUREMENT	Simpson,Liana Rae	N/A	10 months ago	No tags	Selected

Stage	Tests
BAREMODULEASSEMBLY
UNHAPPY
NOT_USED
BAREMODULE/GRAVEYARD
BAREMODULERECEPTION	Visual Inspection (VISUAL_INSPECTION) Mass Measurement (MASS_MEASUREMENT) Quad Bare Module Metrology (QUAD_BARE_MODULE_METROLOGY) Flatness (FLATNESS) Sensor IV on bare module (BARE_MODULE_SENSOR_IV) Single Bare Module Metrology (SINGLE_BARE_MODULE_METROLOGY)
MODULE/INIT
MODULE/ASSEMBLY
MODULE/WIREBONDING
MODULE/INITIAL_WARM
MODULE/QC_CROSSCHECK
MODULE/INITIAL_COLD
MODULE/PARYLENE_MASKING
MODULE/PARYLENE_COATING
MODULE/PARYLENE_UNMASKING
MODULE/WIREBOND_PROTECTION
MODULE/POST_PARYLENE_WARM
MODULE/POST_PARYLENE_COLD
MODULE/THERMAL_CYCLES
MODULE/LONG_TERM_STABILITY_TEST
MODULE/FINAL_WARM
MODULE/FINAL_COLD
MODULE/FINAL_METROLOGY
MODULE/QC_STATUS
MODULE/UNHAPPY
MODULE/NOTCONSIDEREDINYIELDS
MODULE/GRAVEYARD
MODULE/COMPLETE
MODULE/RECEPTION
MODULE/TAB_CUTTING
LLS/PRE_TC_WARM
LLS/PRE_TC_COLD
LLS/POST_TC_WARM
LLS/POST_TC_COLD
LLS/RECEPTION
OB_LOADED_MODULE_CELL/INIT
OB_LOADED_MODULE_CELL/ASSEMBLY
OB_LOADED_MODULE_CELL/WIREBOND_PROTECTION
OB_LOADED_MODULE_CELL/THERMAL_CYCLES
OB_LOADED_MODULE_CELL/FINAL_WARM
OB_LOADED_MODULE_CELL/FINAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_WARM
OB_LOADED_MODULE_CELL/ENVELOPE_CHECK
OB_LOADED_MODULE_CELL/QC_STATUS
OB_LOADED_MODULE_CELL/UNHAPPY
OB_LOADED_MODULE_CELL/GRAVEYARD
OB_LOADED_MODULE_CELL/COMPLETE
OB_LOADED_MODULE_CELL/RECEPTION
OB_LOADED_MODULE_CELL/TAB_CUTTING
OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION

20UPGB43200370

MODULE/UNHAPPY

Component Information

Distribution of chips on wafer

Properties

Comments

Test: QUAD_BARE_MODULE_METROLOGY QC Passed

(Stage: BAREMODULERECEPTION)

Basic View Only: custom view for this TestRun is not prepared.

Metadata

Results

ProductionDB Record

Current Stage: Modules failed test, needs investigation

Past QC Stages and Results

Ranking of the module (MODULE/QC_STATUS)

Final flatness measurement (MODULE/FINAL_METROLOGY)

Final Cold (MODULE/FINAL_COLD)

Final Warm (MODULE/FINAL_WARM)

Long Term Stability Test (MODULE/LONG_TERM_STABILITY_TEST)

Thermal Cycles (MODULE/THERMAL_CYCLES)

Post-Parylene Cold (MODULE/POST_PARYLENE_COLD)

Post-Parylene Warm (MODULE/POST_PARYLENE_WARM)

Wirebond Protection (alt) (MODULE/WIREBOND_PROTECTION)

Parylene Unmasking (MODULE/PARYLENE_UNMASKING)

Parylene Coating (MODULE/PARYLENE_COATING)

Parylene Masking (MODULE/PARYLENE_MASKING)

Initial Cold (MODULE/INITIAL_COLD)

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Reception at ITk institute (BAREMODULERECEPTION)

GRAVEYARD - (unassembled) Bare Module impossible to recover (BAREMODULE/GRAVEYARD)

Not to be used for the detector (NOT_USED)

Bare module failed test, needs investigation (UNHAPPY)

Bare module assembly (BAREMODULEASSEMBLY)

All Registered QC Tests

Check QC Flow

Back to top page of this component