20UPGB43200170

MODULE/FINAL_METROLOGY

Component Information

Serial Number	20UPGB43200170
ProdDB ID	552a4b…329a8f
LocalDB ID	67c714855cfcdd14475557ce
Component Type	BARE_MODULE
Parents	20UPGM23210791
Children	20UPGFC0142123 FE Chip 20UPGFC0142156 FE Chip 20UPGFC0142120 FE Chip 20UPGFC0142214 FE Chip 20UPGS33304995 Sensor Tile
Flags

Broken at FE chip level

Broken during handling

Broken at sensor level

FE chip or chips fell off

Other issues

Inner pixel

Used for bare module QA

Distribution of chips on wafer

Properties

Item	Value
FE chip version readonly	3
Sensor Type	5
Vendor code readonly	2
Thickness of FE chips (RD53A)	None

Comments

Test: MASS_MEASUREMENT QC Passed

(Stage: BAREMODULERECEPTION)

Basic View Only: custom view for this TestRun is not prepared.

Metadata

Key	Data
QC Passed	True
Date	5 months ago
component ObjectId	67c714855cfcdd14475557ce
Stage	BAREMODULERECEPTION
Test Type	MASS_MEASUREMENT
Institute ObjectId
User Name	Simpson,Liana Rae
ObjectId of this record	686351842cb2a5e981aba31b
ObjectId of RAW record	None
Tags	No tags

Results

Key	Data
ANALYSIS_VERSION	mqat vmqat v2.4.1
MEASUREMENT_DATE	2025-05-08T01:05:00.000Z
OPERATOR_IDENTITY	Tim Cundiff
SCALE_ACCURACY	0.003
MASS	1334

ProductionDB Record

Expand ProductionDB Record

686351842cb2a5e981aba31b

state

ready

stateTs

2025-07-01T03:09:56.481Z

stateUserIdentity

1294-8027-1

date

2025-05-08T01:05:00.000Z

testType

id	5f87daff50d75e000a335805
code	MASS_MEASUREMENT
name	Mass Measurement
state	active

institution

id	5d318624df98f200097386d5
code	ANL
name	Argonne National Laboratory

user

id	6797ca0f2ffbf908f24868f9
userIdentity	1294-8027-1
firstName	Simpson,
middleName
lastName	Liana Rae

runNumber

passed

True

problems

False

properties

code	name	dataType	valueType	required	value	rangeMin	rangeMax
ANALYSIS_VERSION	Analysis Version	string	single	False	mqat v2.4.1	None	None
MEASUREMENT_DATE	Date measurement performed	datetime	None	False	2025-05-08T01:05:00.000Z	None	None
OPERATOR_IDENTITY	Operator identity	string	single	False	Tim Cundiff	None	None
SCALE_ACCURACY	Scale Accuracy [mg]	float	single	False	0.003	None	None

results

code	name	dataType	valueType	arrayDimensions	additional	value	associateChild
MASS	Mass [mg]	float	single	None	False	1334	None

cts

2025-07-01T03:09:56.481Z

sys

cts	2025-07-01T03:09:56.481Z
mts	2025-07-01T03:09:56.481Z
rev	0

defects

comments

None

attachments

components

code

state

stateTs

stateUserIdentity

dummy

completed

completedTs

completedUserIdentity

trashed

trashedTs

trashedUserIdentity

serialNumber

alternativeIdentifier

ancestorMap

project

subproject

componentType

type

properties

testedAtStage

institution

67c714855cfcdd14475557ce

552a4b7c8aa38e7ae25270f4b9329a8f

ready

2025-03-04T14:56:05.560Z

23-6780-1

False

None

False

None

20UPGB43200170

None

parent

component

68507fd8e85f5d0f12b3413c

code

32dad6daf07007ec2d75de8924065c70

state

ready

stateTs

2025-06-16T20:34:32.509Z

stateUserIdentity

1294-8027-1

dummy

False

completed

False

completedTs

None

completedUserIdentity

None

trashed

False

trashedTs

None

trashedUserIdentity

None

serialNumber

20UPGM23210791

alternativeIdentifier

ANL_ITkPix_95

project

code	P
name	Pixels

subproject

code	PG
name	Pixel general

componentType

code	MODULE
name	Module

type

code	OUTER_SYSTEM_QUAD_MODULE
name	Outer system quad module

testedAtStage

code	MODULE/INIT
name	Initial state to associate flex to bare module

highestLevelParent

component

68507fd8e85f5d0f12b3413c

code

32dad6daf07007ec2d75de8924065c70

state

ready

stateTs

2025-06-16T20:34:32.509Z

stateUserIdentity

1294-8027-1

dummy

False

completed

False

completedTs

None

completedUserIdentity

None

trashed

False

trashedTs

None

trashedUserIdentity

None

serialNumber

20UPGM23210791

alternativeIdentifier

ANL_ITkPix_95

project

code	P
name	Pixels

subproject

code	PG
name	Pixel general

componentType

code	MODULE
name	Module

type

code	OUTER_SYSTEM_QUAD_MODULE
name	Outer system quad module

testedAtStage

code	MODULE/INIT
name	Initial state to associate flex to bare module

code	P
name	Pixels

code	PG
name	Pixel general

code	BARE_MODULE
name	Bare Module

code	QUAD_BARE_MODULE
name	Quad bare module

code

name

dataType

required

default

value

codeTable

FECHIP_VERSION

FE chip version

codeTable

True

False

ITkpix_v2

code	value
0	RD53A
1	ITkpix_v1
2	ITkpix_v1.1
3	ITkpix_v2
9	No FE chip

SENSOR_TYPE

Sensor Type

codeTable

True

False

Outer pixel quad sensor tile

code	value
0	No sensor
1	Market survey sensor tile
2	L0 inner pixel 3D sensor tile
3	L0 inner pixel planar sensor tile
4	L1 inner pixel quad sensor tile
5	Outer pixel quad sensor tile
9	Dummy sensor tile

VENDOR

Vendor code

codeTable

True

False

IZM

code	value
0	Advacam
1	Leonardo
2	IZM
3	HPK (in-kind)
4	HPK (CERN order)
5	RAL (in-house)
6	Glasgow (in-house)
9	ITk institute

code	BAREMODULERECEPTION
name	Reception at ITk institute
order	3
initial	False
final	False

code	IZM
name	Fraunhofer-Institut für Zuverlässigkeit und Mikrointegration (IZM)

Current Stage: Final flatness measurement

No tests are allocated for this stage.

Past QC Stages and Results

Final Cold (MODULE/FINAL_COLD)

Final Warm (MODULE/FINAL_WARM)

Long Term Stability Test (MODULE/LONG_TERM_STABILITY_TEST)

Thermal Cycles (MODULE/THERMAL_CYCLES)

Post-Parylene Cold (MODULE/POST_PARYLENE_COLD)

Post-Parylene Warm (MODULE/POST_PARYLENE_WARM)

Wirebond Protection (alt) (MODULE/WIREBOND_PROTECTION)

Parylene Unmasking (MODULE/PARYLENE_UNMASKING)

Parylene Coating (MODULE/PARYLENE_COATING)

Parylene Masking (MODULE/PARYLENE_MASKING)

Initial Cold (MODULE/INITIAL_COLD)

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Reception at ITk institute (BAREMODULERECEPTION)

Test	Local Result	ProdDB Record
Sensor IV on bare module (BARE_MODULE_SENSOR_IV)	Registered	Registered
Flatness (FLATNESS)	No result	N/A
Mass Measurement (MASS_MEASUREMENT)	Registered	Registered
Quad Bare Module Metrology (QUAD_BARE_MODULE_METROLOGY)	Registered	Registered
Single Bare Module Metrology (SINGLE_BARE_MODULE_METROLOGY)	No result	N/A
Visual Inspection (VISUAL_INSPECTION)	Registered	Registered

Not to be used for the detector (NOT_USED)

Bare module failed test, needs investigation (UNHAPPY)

Bare module assembly (BAREMODULEASSEMBLY)

LocalDB Test ID	Stage	Test Name	Inspector	Measurement Date	Analysis Date	Tags	QC Registration
686351…aba31b	BAREMODULERECEPTION	MASS_MEASUREMENT	Simpson,Liana Rae	N/A	5 months ago	No tags	Selected
68488d…ad15e6	BAREMODULERECEPTION	BARE_MODULE_SENSOR_IV	Simpson,Liana Rae	N/A	6 months ago	No tags	Selected
683774…4dbb1f	BAREMODULERECEPTION	QUAD_BARE_MODULE_METROLOGY	DoyeongKim	N/A	7 months ago	No tags	Selected

Stage	Tests
BAREMODULEASSEMBLY
UNHAPPY
NOT_USED
BAREMODULERECEPTION	Visual Inspection (VISUAL_INSPECTION) Mass Measurement (MASS_MEASUREMENT) Quad Bare Module Metrology (QUAD_BARE_MODULE_METROLOGY) Flatness (FLATNESS) Sensor IV on bare module (BARE_MODULE_SENSOR_IV) Single Bare Module Metrology (SINGLE_BARE_MODULE_METROLOGY)
MODULE/INIT
MODULE/ASSEMBLY
MODULE/WIREBONDING
MODULE/INITIAL_WARM
MODULE/QC_CROSSCHECK
MODULE/INITIAL_COLD
MODULE/PARYLENE_MASKING
MODULE/PARYLENE_COATING
MODULE/PARYLENE_UNMASKING
MODULE/WIREBOND_PROTECTION
MODULE/POST_PARYLENE_WARM
MODULE/POST_PARYLENE_COLD
MODULE/THERMAL_CYCLES
MODULE/LONG_TERM_STABILITY_TEST
MODULE/FINAL_WARM
MODULE/FINAL_COLD
MODULE/FINAL_METROLOGY
MODULE/QC_STATUS
MODULE/UNHAPPY
MODULE/NOTCONSIDEREDINYIELDS
MODULE/GRAVEYARD
MODULE/COMPLETE
MODULE/RECEPTION
MODULE/TAB_CUTTING
LLS/PRE_TC_WARM
LLS/PRE_TC_COLD
LLS/POST_TC_WARM
LLS/POST_TC_COLD
LLS/RECEPTION
OB_LOADED_MODULE_CELL/INIT
OB_LOADED_MODULE_CELL/ASSEMBLY
OB_LOADED_MODULE_CELL/THERMAL_CYCLES
OB_LOADED_MODULE_CELL/FINAL_WARM
OB_LOADED_MODULE_CELL/FINAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_COLD
OB_LOADED_MODULE_CELL/THERMAL_WARM
OB_LOADED_MODULE_CELL/ENVELOPE_CHECK
OB_LOADED_MODULE_CELL/QC_STATUS
OB_LOADED_MODULE_CELL/UNHAPPY
OB_LOADED_MODULE_CELL/COMPLETE
OB_LOADED_MODULE_CELL/RECEPTION
OB_LOADED_MODULE_CELL/TAB_CUTTING
OB_LOADED_MODULE_CELL/PIGTAIL_INSERTION

20UPGB43200170

MODULE/FINAL_METROLOGY

Component Information

Distribution of chips on wafer

Properties

Comments

Test: MASS_MEASUREMENT QC Passed

(Stage: BAREMODULERECEPTION)

Basic View Only: custom view for this TestRun is not prepared.

Metadata

Results

ProductionDB Record

Current Stage: Final flatness measurement

Past QC Stages and Results

Final Cold (MODULE/FINAL_COLD)

Final Warm (MODULE/FINAL_WARM)

Long Term Stability Test (MODULE/LONG_TERM_STABILITY_TEST)

Thermal Cycles (MODULE/THERMAL_CYCLES)

Post-Parylene Cold (MODULE/POST_PARYLENE_COLD)

Post-Parylene Warm (MODULE/POST_PARYLENE_WARM)

Wirebond Protection (alt) (MODULE/WIREBOND_PROTECTION)

Parylene Unmasking (MODULE/PARYLENE_UNMASKING)

Parylene Coating (MODULE/PARYLENE_COATING)

Parylene Masking (MODULE/PARYLENE_MASKING)

Initial Cold (MODULE/INITIAL_COLD)

QC cross-check (module swapping) (MODULE/QC_CROSSCHECK)

Initial Warm (MODULE/INITIAL_WARM)

Wire Bonding (MODULE/WIREBONDING)

Bare module to module PCB assembly (MODULE/ASSEMBLY)

Initial state to associate flex to bare module (MODULE/INIT)

Reception at ITk institute (BAREMODULERECEPTION)

Not to be used for the detector (NOT_USED)

Bare module failed test, needs investigation (UNHAPPY)

Bare module assembly (BAREMODULEASSEMBLY)

All Registered QC Tests

Check QC Flow

Back to top page of this component